Wire & Felt Cleaners
ProJet Wire and Felt Cleaners (2)
Impingement angles of needle jets
Needle jets will also clean in hard to reach spots on the inside of fabric
Energy data, Type F (Forming Fabrics)
- Maximum pressure: 120 bar (1800 psig)
- Water consumption: 5 l/min (1.2 GPM)
- Compressed air consumption: 1.0 m³/min (35 CFM)
Forming Fabric: Before and after cleaning by ProJet
Energy data, Type P (Press Felts)
- Maximum pressure: 50 bar (700 psig)
- Water consumption: < 4 l/min (< 1.0 GPM)
- Compressed air consumption: 1.0 m³/min (35 CFM)
Press felt: Left side was cleaned by ProJet
Copyright © Trimill Industrial Systems Inc.