Wire & Felt Cleaners
ProJet Wire and Felt Cleaners (4)
Energy data, Type DC (Dryer Fabrics, Continuous)
- Maximum pressure: 350 bar (5000 psig)
- Water consumption per nozzle: 0.5 l/min (0.12 GPM)
- Compressed air consumption: 1.0 m³/min (35 CFM)
Dryer Fabric: Before and after cleaning by ProJet
Features & Benefits
- Fully automatic
- Every 10 – 60 minutes
- Brush will clean air knife
- Water will flush cleaning from inside
- Because park position is outside dryer hood, nozzles van be changed during production without entering the dryer hood
- Swing doors close dryer hood again, to avoid heat loss.
Copyright © Trimill Industrial Systems Inc.