ProJet Wire and Felt Cleaners (6)

Combi Cleaner for Dryer Fabrics Continuous & Batch Cleaning

Combi Cleaner is a Combi-nation of ProCleaner and Shock Cleaner.

ProJet guarantees that the ProCleaner, type 150 (continuous dryer fabric cleaner) will keep the air permeability at least 80% of its original value during normal operation and normal production. However, it may occur in a short period extraordinary build-up of contamination takes place. This may happen at grade changes, sheet breaks, etc. To be able to clean all this build-up in a very short period of time, 10-15 minutes, the Shock Cleaner part (discontinuous cleaning) may be switched on. This can be done automatically or manually. The Shock Cleaner can restore air permeability to close to 100% of its original value.

Energy data, Combi Cleaner - Continuous Cleaning

Maximum pressure: 350 bar (5000 psig)
Water consumption per nozzle: 0.5 l/min (0.12 GPM)
Compressed air consumption: 1.0 m³/min (35 CFM)

Energy data, Combi Cleaner - Batch Cleaning

Maximum pressure: 80 bar (12 psig)
Water consumption per nozzle: 15 l/min (3.5 GPM)
Compressed air consumption: 1.0 m³/min (35 CFM)

Previous 1 2 3 4 5 6 7 Next